Meridian 555 Dokumentacja Pobierz pdf (Strona 182)

6-12 Restore system from backup

Restoring a system from backup

Standard 1.0 System Installation and Modification Guide January 1998

Restoring a system from backup

When to use these

procedures

Use the common procedure

• to display the System Installation and Modification Menu

and the System Operation Utility Menu

Use the restore from backup procedure

• to restore a failed system to the same operational state (or

as close as possible) that it had before the problem occurred

• for a platform migration

Common procedure

To display the System Installation and Modification Menu and

the System Operation Utility Menu, follow these steps.

Starting Point: Meridian Mail System Status and Maintenance Menu

Step Action

1 Select the “System Status” screen and perform a courtesy-

down procedure before starting on any of the following steps.

Note:

Do this prior to starting any of the procedures described

in this guide to prevent calls from being abruptly terminated

when the operation begins. For more information, see the

System Administration Guide

(NTP 555-70x1-30x) for your

system.

2 Insert the Install/data tape into the tape drive.

Note:

Refer to Chapter 5 of the

Installation and Maintenance

Guide

(NTP 555-70x1-250) for tape insertion instructions.

3 Turn off the power to Meridian Mail, or press the reset button

on the MMP40 card.

Note:

Reset node 1 first, then nodes 2 through 5 in sequence,

if applicable. For more information on power up and power

down procedures, refer to Chapter 14 in the

Installation and

Maintenance Guide

(NTP 555-70x1-250).

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 333 334

Brak uwag

Meridian 555 Dokumentacja Strona 182